Rubber Lined Hydrocyclone

Rubber lined hydrocyclone Sand Separators utilize a conical shaped separator that accelerates the velocity of water maximizing separation of sand and other solid matter with greater than 90% efficiency. Flushing frequency is reduced due to the large holding capacity of our sedimentation tanks. KOSGA Wear resistant rubber lined hydrocyclones protect the irrigation components from damage and abrasion caused by debris and add years of performance to the life of your irrigation system.

Based on the centrifuge principle, the particles are spun against the outside wall of the Wear resistant rubber lined hydrocyclones Hydrocyclone and gravitate towards the bottom into the underflow chamber (sedimentation tank) while clean liquid moves upward to the center of the spiral, towards the top outlet. The velocity at which the water flows through the rubber lined hydrocyclones determines the efficiency at which the particles are separated from the water.

Normal working conditions are achieved when headloss on the Wear resistant rubber lined hydrocyclones Hydrocyclone is not less than 3 psi. A headloss of less than 3 psi will reduce the separation efficiency and a headloss of more than 8 psi might induce increased erosion.

The flow during operation of the system needs to be fairly constant to ensure effectiveness of separator.

Main Advantages:
1.Cyclones for classification, dewatering, densifying, fines recovery and more
2.Achieve precise cut points in your slurry
3.Improved capacity and reduced wear rates with scrolled evolute design
4.Customised cyclone sizes and designs according to your application requirements
5.Innovative designs reduce turbulence and misplacement of product; rubber lips prevent spillage
6.Abrasion and heat resistant liners materials reduce wear

Rubber Lined Hydrocyclone Images